Repositories (22)
This is an ESP32 / ESP8266 WiFi Connection Manager with fallback web configuration portal. Use this library for configuring ESP32 (including ESP32-S2 and ESP32-C3), ESP8266 modules' WiFi, etc. Credentials at runtime. You can also specify static DNS servers, personalized HostName, fixed or random AP WiFi channel. With examples supporting ArduinoJson
This is an ESP32 (including ESP32-S2 and ESP32-C3) / ESP8266 WiFi Connection Manager, using ESPAsyncWebServer, with fallback web configuration portal. Use this library for configuring ESP32, ESP8266 modules' WiFi, etc. Credentials at runtime. You can also specify static DNS servers, personalized HostName, fixed or random AP WiFi channel. With examples supporting ArduinoJson 6.0.0+ as well as 5.13.5- . Using AsyncDNSServer instead of DNSServer now.
This library enables you to use Interrupt from Hardware Timers on an ESP8266-based board. It now supports 16 ISR-based timers, while consuming only 1 hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks.
Simple Async HTTP Request library, supporting GET, POST, PUT, PATCH, DELETE and HEAD, on top of AsyncTCP libraries, such as AsyncTCP, ESPAsyncTCP, AsyncTCP_STM32, etc.. for ESP32 (including ESP32_S2, ESP32_S3 and ESP32_C3), WT32_ETH01 (ESP32 + LAN8720), ESP8266 (WiFi or W5x00) and currently STM32 with built-in LAN8742A Ethernet.
Arduino Arduino Library for ESP8266, ESP32, Portenta_H7, STM32 and RP2040W asynchronous MQTT client implementation. This library, ported to support ESP32, WT32_ETH01 (ESP32 + LAN8720), ESP8266, Portenta_H7 (Ethernet or WiFi) and STM32 (LAN8742A or LAN8720 Ethernet), Teensy 4.1 using QNEthernet, RASPBERRY_PI_PICO_W with CYW43439 WiFi. Currently supporting TLS/SSL for ESP32 only
Library using AsyncWebServer to configure MultiWiFi/Credentials at runtime for ESP32 (including ESP32-S2 and ESP32-C3) and ESP8266 boards. You can also specify DHCP HostName, static AP and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Credentials are saved in LittleFS, SPIFFS or EEPROM. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. Double or MultiDetectDetector as well as Virtual Switches feature permits entering Config Portal as requested.
The FlashStorage_STM32 library aims to provide a convenient way to store and retrieve user's data using the non-volatile flash memory of STM32F/L/H/G/WB/MP1. It's using the buffered read and write to minimize the access to Flash. It now supports writing and reading the whole object, not just byte-and-byte. New STM32 core v2.0.0 is also supported now. Useful if the EEPROM is not available or too small. Currently, STM32F/L/H/G/WB/MP1 are supported.
The FlashStorage_SAMD library provides a convenient way to store and retrieve user's data using the non-volatile flash memory
Library for NTPClient to connect to an NTP time-server. Get time from a NTP time-server and keep it in sync. For ESP8266/ESP32, nRF52, SAMD21/SAMD51, STM32F/L/H/G/WB/MP1, Teensy, etc. besides AVR, using ESP WiFi, WiFiNINA, Ethernet W5x00, ENC28J60, LAN8742A, ESP8266/ESP32 AT-command WiFi.
This library enables you to use Interrupt from Hardware Timers on an SAMD-based board. These SAMD Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's mandatory if you need to measure some data requiring better accuracy. It now supports 16 ISR-based Timers, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based Timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. SAMD21 now can use 6 Timers
This library enables you to use RTC from RP2040-based boards such as Nano_RP2040_Connect, RASPBERRY_PI_PICO. This RP2040-based RTC, using Interrupt, has no battery backup. Time will be lost when powered down. To need NTP-client to update RTC every start-up.
Wrapper of LittleFS for Arduino MBED RP2040 boards. This library facilitates your usage of LittleFS for the onboard flash. LittleFS supports power fail safety and high performance
Library to facilitate time zone conversions and automatic daylight saving (summer) time adjustments. For ESP8266, ESP32, WT32-ETH01 (ESP32 + LAN8720), SAMD21, SAMD51, nRF52, STM32F/L/H/G/WB/MP1, Teensy, SAM DUE, RTL8720DN, RP2040-based (Nano_RP2040_Connect, RASPBERRY_PI_PICO), Portenta_H7 (Ethernet or WiFi) boards, etc. using W5x00/ENC28J60/LAN8742A Ethernet, ESP or ESP-AT WiFi or WiFiNINA. Ethernet_Generic library is used as default for W5x00.
Library to configure WiFi/Credentials at runtime for Teensy, SAM DUE, STM32F/L/H/G/WB/MP1, SAMD21/SAMD51, RP2040-based boards, etc. using WizFi360 /ESP8266 /ESP32-AT-command shields. You can also specify static AP and STA IP.
Wrapper of FS (LittleFS or not-advisable FATFS) for Arduino MBED nRF52840-based boards, such as Nano_33_BLE boards. This library facilitates your usage of FS (LittleFS or FATFS) for the onboard flash. FS supports power fail safety and high performance
The FlashStorage_STM32F1 library aims to provide a convenient way to store and retrieve user's data using the non-volatile flash memory of STM32F1/F3. It's using the buffered read and write to minimize the access to Flash. It now supports writing and reading the whole object, not just byte-and-byte. New STM32 core v2.0.0 is supported now. Useful if the EEPROM is not available or too small. Currently, STM32F1/F3 are supported.
Library for DS3231/DS3232 Extremely Accurate I2C-Integrated RTC/TCXO/Crystal. For nRF52, SAMD21/SAMD51, STM32F/L/H/G/WB/MP1, Teensy, Portenta_H7 boards, RP2040-based, etc. besides ESP8266/ESP32, using ESP WiFi, Portenta_H7 WiFi, WiFiNINA, Portenta_H7 Ethernet, Ethernet W5x00, ENC28J60, LAN8742A, ESP8266/ESP32 AT-command WiFi. Ethernet_Generic library is used as default for W5x00 Ethernet
This library enables you to use Interrupt from Hardware Timers on an STM32-based board. These STM32 Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's mandatory if you need to measure some data requiring better accuracy. It now supports 16 ISR-based Timers, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based Timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks.
This library enables you to use Interrupt from Hardware Timers on an nRF52-based board. These nRF52 Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise than other software timers using millis() or micros(). Now supports `Sparkfun Pro nRF52840 Mini`
This library enables you to use Interrupt from Hardware Timers on an Teensy-based board such as Teensy 4.x, 3.x, LC, 2.0, etc. These Teensy Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's mandatory if you need to measure some data requiring better accuracy. It now supports 16 ISR-based Timers, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based Timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks.
This library enables you to use RTC from RTL8720-based boards such as RTL8720DN, RTL8722DM, RTL8722CSM. This RTL8720-based RTC, using Interrupt, has no battery backup. Time will be lost when powered down. To need NTP-client to update RTC every start-up.
Wrapper of LittleFS for Arduino MBED Portenta_H7 boards. This library facilitates your usage of LittleFS for the onboard flash. LittleFS supports power fail safety and high performance